Drossbach HD 315
High-speed for maximum flexibility
Technical Data
| Max. mech. speed | 25 m/min / 82 ft./min |
| PE/PP output | 850 kg/h / 1,873 lbs/h |
| Measurement/weight: | |
| - Max. pipe outer diameter (OD) | 315 mm / 12,5" |
| - Min. pipe internal diameter (ID) | 40 mm / 1.5/8" |
| Number of mold blocks (per side) | 38 |
| Length | 3900 mm / 12.83 ft. |
| Width | 2290 mm / 7.53 ft. |
| Height (depending on extrusion height) | 1900 mm / 6.25 ft. |
| Length of molding area | 2200 mm / 7.24 ft. |
| Max. travel | 2800 mm / 9.19 ft. |
| Weight of machine without mold blocks | 5300 kg / 11,681 lbs |
3d-Modell
-
Production of corrugated plastic pipes with high production speed thanks to directly water-cooled mold blocks and an integrated full vacuum system.
-
Corrugated pipe machine mounted onto a solid, welded frame. This guarantees stability during the production and is the basic for high speed.
-
Open construction with wide opening access doors to the horizontally rotating mold blocks.
-
Full vacuum system for perfect profiling of corrugated pipes:
- 4 vacuum zones which can be controlled from operator's panel manually or automatically
- Automatic opening of selected zones
- Vacuum values for all 4 zones automatically registered and displayed on operator' panel
- Process data acquisition - production speed, drive load, temperature and consumption of cooling water in l/min - are constantly recordered
- Process air control from operator' panel
-
Equipped with 38 directly water-cooled mold block pairs for the production of pipes of 6 m / 19.68 ft. length, if required including inline produced sockets.
-
Mold blocks made of cast aluminium combine a low weight and excellent heat transfer properties.
-
Robust system with retainers guarantees a perfect movement of the mold blocks.
-
The spiral-mandrel die head provides constant quality of the corrugated pipe with a consistent even wall distribution.
-
After having adjusted, the die head is fixed to the corrugator by means of the centering ring, no afterwards alignment necessary.
-
Maintenance-free operation thanks to fully automatic centralized lubrication system.
-
The simple and fast exchange of mold blocks can be optimized with the optional HD 315 Quick Change.
DIAMETERS:
From ID 100 mm to OD 315 mm / 4” – 12,4”
Materials:
PE, PP, PVC, further plastics available upon request.
High-speed for maximum flexibility
Application
